How to clean acrylic bathtubs at home?

All housewives are faced with the need to clean plumbing fixtures. Before washing an acrylic bath, you should understand what constitutes the material from which it is made. Acrylic is a hard plastic that was first used for prosthetics, and then became very popular for the manufacture of plumbing fixtures. Caring for an acrylic bathtub is very simple, besides they are very light and comfortable, therefore they quickly displace old and heavy cast-iron.

Acrylic bathtubs

Capacities from this material are made by extrusion and molding. In the first case, fiberglass and epoxy are added for structural rigidity, and such a bath is installed on a metal or moisture-proof wooden frame.

Cast baths can be placed immediately on the legs, because they are much more rigid and durable. This strength gives resistance to mechanical damage, so it’s much easier to clean such a container, because there is no need to constantly be afraid of damaging it.

Caring for an acrylic bath makes it easy to include additives that prevent the growth of fungus, bacteria and mold on the surface in the material during manufacture. Acrylic is also not susceptible to any kind of corrosion.

How to wash an acrylic bath? Most impurities can be easily washed off the surface of the bathtub with plain water and a sponge without the use of cleaning agents. Since the material is quite easily scratched, the cleaning agents used should not be abrasive, i.e. contain small insoluble particles. It is also not recommended to pour boiling water into the bath.

How often to wash?

Than to clean an acrylic bath more often, the better. After all, it is much easier to regularly wash off small impurities than to then try to clean and wipe off deeply stained spots. After each use, it is recommended to rinse the bath with water and a mild detergent, such as liquid soap, and then wipe it dry with a rag or old towel.

Doing bath cleaning at home with more active substances is advised once every 2-3 weeks. The product must be applied to the entire surface, let it stand for a while, and then rinse thoroughly.

To prevent yellowing from constantly dripping water on the bath, it is necessary to monitor the serviceability of the taps and repair them in time. If the surface has already turned yellow, then the rust should be cleaned with special tools designed to remove it.

Sediment removal

If the tap water is hard enough, then deposits regularly occur on the acrylic bath - the so-called water stone. To remove it, you can use appropriate cleaning agents or simpler folk methods - for example, periodically make a weak acid solution.

1. Fill the bathtub with room temperature water.
2. Add 1-2 liters of a weak solution of vinegar or citric acid and mix it thoroughly.
3. Leave for 12 hours.
4. Drain, rinse the bath thoroughly and wipe dry with a soft cloth.

Tip

If it is necessary to disinfect the bath at home, the procedure is no different, only add antiseptic agents.

What tools to use?

Caring for an acrylic bathtub is best done using mild detergents like those used for washing dishes. Liquid and regular soaps also work well.To clean the bath, you can rinse the old bottle of shampoo or shower gel that has ended, because usually they still have a lot of funds on the walls. Such soft formulations can be left on the surface of the bath for a long time without the slightest risk of damage.

How to clean an acrylic bath if it has faded and turned yellow? To restore her shine, after washing she is greased with polishing compounds.

Powders like Pemolux, Biolan and Comet, which are cleaned precisely by mechanical friction, are not recommended. The question then becomes: how to clean an acrylic bathtub safely? Exposure to liquid and paste products is more based on chemical removal of contaminants, so they can be used without risk of damaging the surface. However, they usually contain substances that are quite aggressive to the skin and cause irritation and allergies, therefore it is better to clean the bath with rubber gloves.

So, how to wash an acrylic bath, if preference is given to industrial means? There is a group of well-proven products in practice.

1. Bass - liquid detergent used for cleaning bathtubs and showers at home.
2. Cif - A universal product for all surfaces in the bathroom.
3. Acrylan - as the name implies, this is a special tool for acrylic bathtubs and other similar surfaces. Available in the form of foam and copes with mechanical, chemical and biological pollution and yellowness.

What means should definitely not be cleaned:

• abrasive substances;
• hard metal brushes;
• means with a high content of ammonia, bleach, acetone or formaldehydes.

Folk remedy for bath cleanliness

Mistresses often ask themselves how to clean an acrylic bath with chemicals or natural products. Citric acid is very suitable for complex cleaning of yellowness, rust, limescale and yellowish traces of water at home. It should be diluted in warm water in the ratio of two glasses of water per bag and mixed thoroughly. On the surface of the bath, the mixture is applied with a regular dishcloth and left for a while. Then, when the acid dissolves the dirt a little, they should be cleaned with the hard side of the sponge in a circular motion, and then rinse the bath thoroughly.

Citric acid is also used to clean taps, pipes, and tile surfaces. In the absence of acid, single small impurities can be removed with a slice of lemon - the effect will be no worse.

We also advise you to read: how to clean the bath at home