How to wash a shower cabin from various pollution?

A hostess who monitors the cleanliness of her home should know how to wash the shower stall. Unless, of course, this device is installed. And in modern apartments, they are increasingly found. Especially with a small bathroom, where they save a little space. But if the cabin is not cleaned on time, then it will quickly lose its neat appearance, the windows will darken, and stains will appear.

How often to wash a shower stall?

Care must be regular. Three types of cleaning can be distinguished depending on the degree of pollution.

• Daily cleansing. It is carried out after each shower. To do it is simple - just rinse all the surfaces inside the cabin with hot, then with cold water and wipe dry. This will wash away the remnants of the soap solution.
• Regular care. It must be carried out every week. Perhaps less often - depending on how many people live in the house and how often they use the shower. To clean surfaces, use detergents. Spray spray or use gels and creams. So you can remove traces of limescale. If it is completely fresh, then the product is immediately washed off. If you are already old, then you need to leave for half an hour, only then rinse. It is important to remember to wipe the cab dry.
• Intensive cleaning. In cases where the care was inadequate or rust and mold appeared due to constant humidity, the use of potent substances is necessary. To wash the shower, the product is applied to the problem area and left for the time specified in the instructions.

The main difficulty lies in the fact that different materials are used in the design of the cabin, the characteristics of each must be taken into account. So, walls and doors are usually made of plastic or glass. The pallet can be acrylic, ceramic, even stone. The faucet and shower head are made of chrome steel, the guides are made of aluminum. Often the cabs are made in the form of a corner, so that they adjoin the walls with the corresponding coating.

But whatever the material, abrasive particles, even cleaning powders, cannot be used. Metal sponges and brushes can leave microscopic scratches on the surface. At first, they can be almost invisible, but the situation will worsen over time, and a neat appearance will be lost.

Wall care

If the walls of the cab are made of glass, then maintaining them is simple. You need to wash the shower with a spray for glass surfaces. Since the door can often be cleaned only when closed, the product should be applied to the sponge and wash the surface with it. This will prevent breathing harmful substances with poor ventilation. Minor impurities can easily be washed off with water. But it’s even more convenient to use a rubber scraper, it is easy to clean any plaque with it.

Plastic parts (e.g. polystyrene) of the plumbing device are cleaned in the same way. But this should be done even more carefully, since the material is porous and gradually absorbs dirt, which darkens.

How to clean the pallet?

Care of the pallet depends on its features. Enameled is the easiest way to clear of plaque. Contamination does not penetrate the smooth top layer, so any gel or spray for such surfaces can easily cope with them. But you should not start the state of the pallet: fresh stains are removed without much effort, and you will have to work on older ones.

Tip

If you install a special filter on the shower, less plaque will form.

If a question arose as to how to wash a shower cabin with an acrylic tray, then you need to remember about the properties of this material. It is lightweight and easy to install, for which it is appreciated. But it requires careful handling. Aggressive chemical agent will lead to erosion, it is also easy to scratch. Use for cleaning is necessary funds designed specifically for this material. Soft substances in its composition will gently wash the delicate surface without damaging its integrity.

Features of washing tiles, steel and aluminum parts

You can clean the tiles in this plumbing device by any means for the bathroom. Particular attention should be paid to the seams between the individual tiles: it is in them that harmful microorganisms accumulate. If the care is poor, then fungus and mold may appear. So it’s important to clean everything thoroughly in order to maintain the appearance and comfortable conditions in the cabin.

Wipe chrome steel carefully so that plaque removal does not cause scratches. Painted aluminum, which is found on individual parts, must also be handled with care. Otherwise, the paint may be erased.

How to wash a shower stall?

It is not necessary to look for special products to wash the shower. The main thing is not to choose those that contain abrasive particles. They should not contain formic acid, formaldehydes, acetone and other solvents. You will also have to consider what materials are used in this plumbing device. A universal tool is suitable for tiles and enamelled pallets; for glasses it is better to choose a spray for windows. Acrylic can be washed even with soap applied to a soft sponge, but it is better to find a polish with wax to create a water-repellent effect.

You can also use special substances to remove problem spots.

• If contamination appears on the surface that is difficult to wash off, a silver polish or toothpaste should be applied to the soft tissue and the desired area should be cleaned. If it is not immediately possible to achieve a result, then the product must be left for 10 minutes. Then rinse thoroughly.
• Deposits of water stone, limescale will help remove folk recipes. The tray should be filled with water and dissolved in it a small amount of lemon juice or vinegar. Leave for several hours, then wash everything.
• In cases where acrylic has lost its appearance, you can try to restore it using special kits.

Care of shower cabins must necessarily include ventilation. At other times, the doors should remain slightly ajar. This will allow moisture to evaporate faster, thereby reducing the risk of mold. And then to bring it out is quite difficult.

Knowing how to wash a shower cabin, you can always keep it clean and prevent the formation of plaque. Home care should be carried out taking into account the properties of various materials. If you make proper efforts, the device will last a long time, and its appearance will be impeccable.