How and how to wash frosted glass from greasy stains on doors

The problem of how to wash frosted glass from greasy stains on doors is most often encountered by families with small children. The little ones are not so careful about their hygiene and are not concerned about the need to maintain the cleanliness of surrounding things. For this reason, the glasses are quickly covered with small glossy spots, which causes their matte splendor to suffer.

Given the specifics of the material, it is rather difficult to wash it from such spots and not damage the texture of the product. Traditional glass processing techniques will not help here, the approach should be special.

Ways to use are prohibited

Wash a specific surface is very difficult because of the features of its coating. The frosted image on the simplest glass appears as a result of sandblasting or acid exposure. Contrary to popular belief, the rough texture that results is very sensitive to external influences. Before cleaning such doors, it is necessary to consider the following points:

The use of abrasives against stains is prohibited, as together with dirt, they will also remove the spraying itself.
Compositions with silicone, acid and alkali frosted glass is also better not to wash. In addition to fatty formations, they will dissolve the top layer of the coating.
In this case, a glass scraper and a traditional version of cleaning with a newspaper will not give the desired result, they will not even be able to eliminate excess moisture.

It turns out that the approach to the material should radically differ from that used when working with ordinary glass. In practice, everything is not so difficult, only you need to wash the coating regularly so that dirt does not accumulate in layers.

Frosted glass processing steps

The easiest way to get rid of oily formations on the doors while they are still fresh. Depending on the degree of contamination, the procedure can do with one or more cleaning steps. Specialists and experienced housewives recommend processing frosted glass with the following compounds:

The solution of chalk. We take three tablespoons of crushed white chalk in a glass of warm water and mix thoroughly. In the resulting composition, wet a soft rag-free rag and pass on both sides of the glass. We wait until the composition dries, after which we erase the remains of the chalk with a clean cloth.

Tip: When working with greasy stains, it is recommended to first apply the prepared compounds to the surface of the stains, and then distribute them over the entire surface of the glass part of the door, then it will be easier to wash them. The positive effect will be more pronounced if it additionally affects the pollution with plastic spatulas or suede for windows.

A good result is the use of ammonia (take a tablespoon of the composition per liter of water). The resulting solution does not need to wash the surface so much as to get wet. Microfiber is best used to remove product residues. It absorbs water well and leaves no streaks.
Vinegar helps well against grease stains. Dissolve a spoonful of 9% solution in a glass of hot water, use for processing problem areas. Then we wipe the entire surface of the frosted glass with a window cleaner. If soap foam appears during processing, it can be washed off with clean cool water.

Numerous greasy marks can be washed with dishwashing gel. The biggest problem with this approach is the removal of soap suds. It’s best to get it wet with microfiber or a clean sponge.
Aged pollution does not lend itself to these types of exposure. To clean them you will have to use acetone or medical alcohol.Processing is best done pointwise, using a cotton swab or sponge, otherwise the smell of the product will disappear for a long time even with the windows open.
Frosted glass can be washed with steam mops, steam generators or steam cleaners. After such intensive processing, it remains only to walk along the surface with microfiber, removing excess moisture.

Glass doors need to be washed very carefully, moisture or chemicals on rubber, silicone and wood gaskets can adversely affect their fixing properties.