How and how can you quickly clean an artificial stone sink from dirt and plaque?

Stylish modern kitchen sinks made of composite materials quickly lose their attractiveness if you do not provide them with proper care. Cleaning a sink made of artificial stone is not difficult, but you need to do this regularly and thoroughly.

In case of violation of the technique of performing manipulations or reducing the frequency of approaches, the dark sink is quickly covered by limescale from running water, and the light - spots from colored drinks. If the faucet leaks even a little, then you will additionally have to clean the sink from rust.

It should be remembered that products made of artificial stone are not as durable and unpretentious as stainless steel. They react poorly to the use of abrasives, solvents, strong alkalis and acids.

Basic recommendations for the care of artificial stone sinks

Stone washing will have to be washed much less often if the following rules for its operation are observed:

1. It is necessary to prevent exposure to too high and low temperatures, as well as their differences, on the sink. It is strictly forbidden to pour boiling water on an artificial stone surface, and then pour it with cold water. Cracks and chips with this approach are guaranteed, and their presence will significantly complicate the cleaning process.
2. Contamination on the walls and bottom of the device is best removed immediately while they are still fresh. Even a dishwashing liquid can handle this.
3. The use of hard brushes, metal washcloths and abrasives is prohibited. If at first they really help to wash the product without effort, then over time from such processing the material will be covered with small scratches, which will negatively affect its appearance and functionality.
4. Stone washing is recommended to be wiped to a dry state after each use. Then you do not have to regularly clean it of limescale.
5. It is better not to pour the rest of tea, coffee or carbonated drinks into such a sink (especially if it is made of light stone). Otherwise, you must immediately wash the device with warm water, otherwise it will remain characteristic spots.

If for some reason it is not possible to comply with these recommendations, then it is better to refuse to buy plumbing from artificial stone. All the same, in the shortest possible time, she will lose her original attractiveness and will need to be replaced.

The most effective tools and rules for their use

Experts recommend washing stone sinks with specialized tools. This is the safest and most effective approach when working with whimsical material. Melamine sponges designed to remove stubborn stains are ideal as tools.

Tip: Contrary to popular belief, products containing chlorine do not harm products made of artificial stone, but unpleasant yellowness or darkening can be eliminated without problems. Moreover, they allow not only to clean, but also to disinfect the surface.

If you need to wash the sink urgently from contamination, and the profile product was not at hand, you can try one of the following methods:

• Minor fresh impurities without trace will be washed away with mustard powder. It is necessary to moisten the material, apply a little aromatic composition to it and rub it gently with a sponge. After this, the composition must be thoroughly washed off and, having dried the sink, make sure that there are no stains.
• Using lemon juice, it is recommended to clean rust, limescale, traces of coffee and tea. For this, we cut the lemon into slices and drive them directly to the problem areas, after which we work with a sponge. It is not recommended to wash a stone sink with citric acid.It's still abrasive, albeit soft.
• Persistent stains can be removed with thick gruel made from baking soda. But you can not rub the surface of artificial stone. Just apply the composition to the pollution, wait five minutes and wash off the mass. Only after that three areas with a soft sponge. If necessary, several approaches are allowed.
• Limescale and rust leave under the influence of Sprite. You need to slightly warm the product, pour directly into the sink and wait a few minutes. Then we wipe the coating with a sponge and, if necessary, try again.
• Gel toothpaste can handle some of the impurities. But you only need to wash the product not with a brush, but with a soft cloth.
• Particularly resistant formation is allowed to rub with vinegar, but it is recommended to first dilute it with water. In the absence of effect, the concentration of the product is gradually increased.

If the spots are so eaten that neither home nor professional products help, this indicates a change in surface texture. In this case, the device is easier to replace than restore.