How to properly and effectively clean the floor depending on the type of coating?

In everyday reality, each of us at least once encounters the question: how to clean a floor that has different types of flooring. Of course, the answer to it is based on the existing type of flooring, which should be repelled. However, there are some general tips for implementing this algorithm, and everyone should know them. However, first things first.

Hostess tips

As a result of various situations related to the repair of an apartment, painting a floor covering and other things, there is always a need to wash a dirty floor. This may cause some problems arising from the variety of existing flooring, which is quite difficult to wash with conventional cleaners. Therefore, in order not to further aggravate the situation, it is necessary to take into account the features of various floor coverings when cleaning them.

However, there are a number of general tips that make it possible to quickly wash any type of flooring.

• Firstly, scattered things and small objects should be removed from the floor in order to smoothly wash its surface with a mop or manually.
• Secondly, using a broom pre-moistened in water, it is necessary to sweep the room and thus remove all garbage.
• Thirdly, proper floor cleaning should start from the farthest room corner located opposite the door. It is from there that all the dirt with a mop with a soft rag should be driven to the doorway.

Tip

Try to walk on a clean wet floor as little as possible so as not to leave visible traces that will surely dry out over time. The use of a mop simplifies this task - with its help you can easily reach hard-to-reach areas, standing in one place.

• Fourth, the mop movements when washing floors should be directed from the walls to the central part, and from there everything should be transferred to the doorway.

Tip

To quickly wash the floor, it should first be divided into conditional squares of a small area, and gradually wash one after another.

• Fifthly, after eroding the floor, it is advisable to wipe it dry with a dry cloth, and periodically change the water to a cleaner one.

How to clean the floor after repair work?

If various repairs were carried out in the apartment, and spots of spilled paint remained on the floor, it is necessary to get rid of them first. To wash such a floor quickly is rather difficult, but quite possible!

To get started, get rid of the stains left after painting the room. A small amount of solvent will help us with this - apply it to the cotton wool and wipe off the trail with it. It is advisable to remove oil stains after painting while still fresh and not completely frozen. In this case, everything will turn out quickly and easily.

Then the entire floor should be washed well with a specially prepared solution with a high concentration of soap. It will help remove any stubborn dirt and make the floor clean.
After this, further floor cleaning must be carried out with clean water to wash off the remnants of soap. You can add a little special floor cleaner to this water. The better you wash the floor with clean water, the brighter it will shine.

Tip

When washing the floor from traces of painting, it is advisable to change the water as often as possible in order to quickly wash the required area and not to drag the dirt from place to place.

Wet cleaning of various types of floor coverings

Many women often come up with the question: how to wash floors with different floor coverings without harming them? Of course, a lot depends on the nature of the material, including the process that directly affects washing.

Today the following types of flooring are most common:

• laminate;
• parquet;
• linoleum;
• wooden floor.

Few people know how to wash floors covered with laminate without damaging its structure. This type of flooring should be washed very carefully due to its complex structure. It is not recommended to wash such a floor often due to the peculiarities of its structure. To quickly clean the floor from the laminate, a large number of special products have been developed that not only wash various contaminants, but also do no harm to the laminate itself. At home, a solution of acetic acid is perfect for washing a laminate. It is prepared by adding one tablespoon of vinegar to five liters of pure water. The resulting solution is recommended to wipe the surface of the laminate and leave it semi-dry. It is advisable to wash the laminate with microfiber, which carefully refers to its surface, gently removing various impurities.

How to properly wash floors covered with parquet board, few know, but it is also necessary to know so as not to spoil the coating over time. Frequent washing of the parquet is also contraindicated, as this may adversely affect its external qualities. It is advisable to quickly wipe the surface of the parquet board from time to time with a soft damp cloth, periodically washing the “tool” in a container with cold water.

If you accidentally left stains on the parquet when painting the walls, you should immediately clean them with a soft cloth. It is quite difficult to remove dried up traces after painting the room, and it is extremely undesirable to use a regular solvent. Therefore, it is better not to allow such traces to appear, and to work with paint extremely carefully.

To give the parquet a shine inherent to the new coating, it should be wiped with a rag previously moistened with water, in which a little glycerin was mixed. Such a solution can be quickly prepared at home and give the parquet a pristine radiance.

Parquet can be rubbed with mastic, which should be purchased in specialized stores. Such rubbing should be done after the parquet has completely dried.

Take part in the survey !!!
How often do you wash the floor in an apartment or house?