How and with what can a kitchen apron be washed from fat?

Quickly and thoroughly washing traces of grease from a kitchen apron made of tile or plastic is not so simple. Aggressive products can ruin the surface texture, and too soft household chemicals will not give the desired result. The most difficult thing is to work with the area above the stove, in this part of the kitchen the fat is dense, melted, rancid.

If you want to remove plaque, of course you can, but it is better not to allow the formation of a multilayer formation and regularly treat the kitchen apron with mild detergents with degreasing components, for example, dishwashing liquid.

Rules for cleaning a kitchen apron that increase the effectiveness of the approach

The effectiveness of the funds used will increase many times, and the result will be obtained with the least effort, subject to the following rules for processing an apron in the kitchen:

• Work will go faster if you preheat the selected product slightly, especially if it is prepared independently, from natural ingredients. If you need to clean the surface of plastic, you first need to make sure that the composition will not remove, in addition to grease, a part of the material.

Tip: Reading an apron in the kitchen is not a pleasant experience due to the variety of strong flavors. In order not to suffer from lacrimation, sneezing and other signs of irritation of the mucous membranes, you must first ventilate the room and not close the window during the manipulation. An extractor hood, no matter how powerful it may be, cannot cope with such a strong odor.

• The easiest way to wash the fat with a sponge. Ordinary rags will be ineffective, metal mesh will damage the surface. The sponge also does not have to be tight, even a conventional dishwashing appliance can do the job without any problems.
• An apron covered with a dense layer of fat is recommended to be pre-doused with steam. If this is a tile, you can put an elongated container with boiling water at the base of the masonry for several minutes. It is better to process the surface of plastic locally, using a teapot spout with hot water for this.
• If the selected product did not help and you need to use another product, you must first wash the material from the remnants of the previous chemistry, otherwise reactions may occur that will lead to surface damage.
• It is strictly forbidden to mix several folk remedies or household chemical products at once in order to increase their effectiveness. A positive result is not guaranteed, and it’s quite possible to spoil the apron in the kitchen forever.

Folk remedies are considered universal, they can be used for surface treatment of plastic, tile and stone. Household chemicals may be highly specialized, so before using it you must carefully read the label.

Folk remedies against stubborn stains

A few years ago, in order to wash persistent stains of fat on the working and decorative surfaces in the kitchen, the housewives used rather cheap improvised components. Their effectiveness and accessibility is so high that even today many women prefer to turn to folk remedies rather than purchasing drugs with a dubious composition.

• Mustard Powder. To clean a not so dirty surface of plastic or tile, you need to use a wet sponge to apply dry powder to problem areas, leave for a few minutes and wipe the product with fat.If the situation is more complicated, you will have to prepare a concentrated solution of dry mustard and warm water. You need to work with gloves, or you can burn your hands.
• Rice broth. The liquid that remains after boiling rice or washing the boiled product does an excellent job with fresh impurities. It is better to use it in a warm form, after processing it is necessary to thoroughly wash the apron with clean water, otherwise whitish stains may appear.
• Lemon acid. It allows not only to clean the tiles, but also disinfects, bleaches, degreases the surface. It can be used in dry form, but first you have to moisten the oily area with warm water. The most effective approach is to use a paste made from citric acid and a small amount of boiled (then there will be no scale) water. It is better not to use such an aggressive component for processing plastic.

• Vinegar. Not the most pleasant at work, but very effective in the fight against fat product. With minor impurities, it is better to first dilute it with boiled water. If the spots are persistent, then we take the composition concentrated and preheated to a very warm state.
• Soap solution. Concentrated soap solution is equally effective when working with traces of fat on any surface. It is best to put a little laundry soap in the bowl, dilute with water and rub the resulting mass into problem areas until you completely get rid of grease stains and stains.
• Baking soda. The best option for cleaning an apron made of plastic. We work with her in the same way as with mustard. Wet the work area with warm water, apply dry powder, wait five minutes and wipe the stains.
• Clay. A product mixed with vinegar allows you to wash the apron from the tiles in a matter of minutes, eliminate all traces of yellowness, scale or smudges. To obtain the best result, clay should be sieved and diluted with vinegar until a homogeneous paste is obtained. After cleaning, the surface must be thoroughly washed and dried with towels.

When restoring order in the kitchen, it is first of all recommended to use the listed tools. Their pairs quickly disappear, so the risk of contamination of food with particles of detergents or their penetration into the skin and mucous membranes is minimal.

Features of the use of household chemicals in the processing of products from tile and plastic

Few people know, but most industrial household chemicals are not suitable for the treatment of persistent stains in the form of stains of fat. With their help, you can easily wash fresh formations, but the plaque, which accumulated for several days and even weeks, they simply spread over an even larger area. It is especially dangerous to use them to neutralize problems on the surface of the plastic.

It happens that the material has already begun to break down, and the fat still covers the surface in some places. In order to prevent a serious mistake, it is worth considering the recommendations on the package. If the product needs to be applied to a sponge and the surface is treated, then its composition is obviously too aggressive and must be used to clean stone or tile. If it is indicated that the mass is better distributed on the surface, then it can be used without concern on any materials.