6 effective methods, clean the grease filter from the hood

In order to be in the kitchen was as pleasant as possible, and most importantly safe, you must remember to periodically wash the filter from the hood. It is this part of the structure that collects all the unpleasant odors, fumes and grease. If you do not clean the filters in a timely manner, then they will lose their functionality, and the accumulated and frozen fat will only worsen the interior of the kitchen.

It must be remembered that if you do not wash the old fat on time, it can get on the burners, which in the end can cause a fire. Before cleaning and removing dirt from the grease filter from the hood, you should familiarize yourself with the instruction manual of the device. It is this precaution that will avoid possible damage.

Preparatory stage

Before proceeding directly to the hood washing, make sure that the appliance is unplugged. In order to remove the hood cover, click the tabs and pull it out of the grooves. Then the filter is removed. The pipe that runs from the hood to the vent should also be removed and washed. Then the air filter is removed. The hood body is also checked for contamination and washed if necessary.

The easiest way to wash fat

It is necessary to wash the hood at least 1 time per quarter. If the hostess uses the household appliance constantly, then cleaning should be done more often. In such a case, it is recommended to rinse the filters at least 1 time per month. Before proceeding to the processing of hoods, the site mschistota.ru recommends that you carefully read the instructions for the device. It indicates which means are allowed to be used for cleaning, and which household chemicals should be discarded.

It is easy to clean the soot from the filter using manual cleaning or using a dishwasher. In the first case, the detergent is diluted with water at a concentration of 1: 4. For 30 minutes, all parts are placed in a soapy liquid, and then scalded with boiling water. If necessary, wipe the structure with a soft cloth. When using the dishwasher, it is recommended to wash the filter at a minimum temperature with delicate detergents.

Laundry soap

If the previous methods of cleaning did not give the desired effect, then it is worth trying folk methods in the fight against soot. Laundry soap (which includes 72% fatty acids) will help to effectively overcome fat. To prepare the detergent, take a half-bar of soap, as well as 2-3 liters of water. Previously, the soap is rubbed on a large grater and poured with boiling water for 30 minutes. Then the solution processes the problem areas on the grate, filter, and also the grid. After a few minutes, using a sponge, metal or plastic scraper, the surface is machined.

Lemon juice

Lemon juice or a slice of citrus will help to cope with fresh impurities. Previously, the juice is dissolved in a small amount of water and rubbed with the problem area. The same procedure is relevant to repeat with a slice of lemon, using it to treat the surface. Lemon juice must be allowed to soak in fat and after 10 minutes, wipe the filter with a damp cloth. If the first time it was not possible to get rid of the dirt, you can carry out the procedure several more times to achieve a full-fledged result.

Soda and ammonia

Using the following method, it will be very easy to clean up the problem areas. The cleaning process includes the following steps:

1. It is necessary to take a pan in which to fit the filter from the hood. The container is pre-filled with water and brought to a boil.
2. 1 teaspoon of soda is gradually added to the liquid. In total, it is recommended to pour half a cup of powder into the water.
3. For a few minutes, the filters are lowered into a pot of boiling water. Soda effectively helps dissolve grease and dirt. After 2-3 minutes, the container is removed from the fire. If the procedure does not give the desired effect, then it must be repeated again, again throwing soda in clean water.
4. In the most difficult cases, ammonia is used after soda. 0.5 cups of the solution is dissolved in 3.5 liters of hot water. It is recommended to place filters in a container with such a tool for 15 minutes.

Important
Do not forget about safety. To protect your hands from the solution, nose and lungs from vapors, as well as to quickly get rid of the unpleasant odor, be sure to work with gloves and a mask, first - open the window in the kitchen.

Before you start cleaning the surface, make sure that it is washable. There are filter models that cannot be cleaned, as they are disposable. If you previously study the operating instructions for the hood, it will be easy to save yourself from wasting time.

Brine

Having resorted to table salt, it is also possible to get rid of old dirt. To prepare a concentrated solution, you should take a sufficient amount of salt, add a little water to it and slightly heat it over a fire (not bringing to a boil). The filter and other small parts from the hood must be lowered into the container with the solution. Then it is recommended to rub the surface with a sponge and rinse under clean running water. In the case when it was not possible to wash the filter with brine, it is necessary to wipe the pollution with citric acid or lemon juice diluted in water.

Vinegar

In the fight against chronic soot, concentrated acetic acid is perfect. It must be applied to the problem area for 10 minutes. After that, when using a dense sponge, remove fat that has time to dissolve. When removing fresh dirt from the grease filter, it is important to dissolve the vinegar in water in a ratio of 1: 2.

Tip
The resource purityis.decorexpro.com/en/ recommends that you prepare a metal surface before using any folk remedy. The main layer of fat is topically removed by mechanical cleaning. To do this, you can take a sharp knife. When cleaning soot, one should be extremely careful and not touch the tip of the surface of the parts. Having finished mechanical cleaning, it will be much easier to remove the remaining fat with a household product.

Household chemicals

In the most difficult cases, when all folk methods did not give the desired effect, it makes sense to try more aggressive substances.

Means for cleaning water pipes (usually concentrated alkali - work only with gloves!) Will allow you to effectively get rid of impurities that appear on the grease filter. The main disadvantage in this method is that it can be used no more than 1-2 times for the entire period of operation of the hood. If you use a cleaning agent often enough, then the alkali, which is part of the product, can damage the metal surface.

The process for cleaning the grease filter involves the use of rubber gloves, a stainless steel sink and pipe cleaner. The required amount of detergent is poured into the sink, the filter is placed for 5-10 minutes. Then the structure is washed several times under running water (until the solution is completely removed from the surface).

To cope with soot, which worsens the appearance of the hood, will allow one of the above methods. It will be much easier to remove grease from the surface if you process the extract with a detergent once every 2-4 weeks. It is easy to protect yourself when cleaning the grease filter by wearing rubber gloves.

When working with acids or alkalis, do not forget to open the window in the kitchen for ventilation. It will be very simple to wash fresh fat using a regular dishwashing detergent and a sponge. In difficult cases, it is important to scrape the top layer of fat with a sharp knife or spatula, and then remove the contamination with a suitable agent. Before cleaning the surface, carefully read the instructions on how to use the device.