What to do with the creak of doors in the room and how to lubricate the hinges?

Squeaky doors terribly get on your nerves. A particularly unpleasant sound occurs when an iron door creaks. What to do in such a situation? How can I get rid of a creak in any room and in the whole apartment? How to eliminate creaking when opening the refrigerator or balcony?

The best lubricants against creaking loops

In fact, in most cases, these problems are solved quite simply. As a rule, the fact that the door creaks is the result of friction of the door hinge elements against each other. These elements need to be lubricated. There are several popular and effective remedies for this:

• machine oil;
• diesel oil;
• spindle oil;
• tsiatim;
• solidol;
• various silicone greases and aerosols;
• special compounds for lubrication.

It is clear that the above substances and materials are unlikely at the right time to be at hand in an apartment or in a house. They will have to go to specialized stores.

Meanwhile, there are alternative means that are almost completely found in any home:

• vegetable oil;
• candle paraffin;
• soft pencil graphite shavings.

However, these simple "folk" remedies still can not be compared in terms of the effect, say, with engine or diesel oil.

About vegetable oil is worth mentioning especially. The door structure after lubricating the hinges with this oil is likely to begin to make sounds again in a few days. In addition, the abundant and frequent use of sunflower oil causes corrosion. So, instead of the old squeak, an even more unpleasant rattle may appear. That is, to achieve a short-term result, vegetable oil is quite suitable, but in order to achieve a long-term victory, you still need to apply something more serious.

What is the best lubrication for the hinges?

The loop lubrication procedure must be carried out very carefully and carefully. There is a very serious risk - pinching your fingers. With your bare hands it’s best not to touch or do anything. Solidol can be applied with a wooden stick. A machine oil is better to simply fill in the problem area, in the gaps of the loop, with a syringe. By the way, engine oil can also be used to combat rust.

Tip

To lubricate as efficiently as possible and to be able to rinse the hinges well, it will not be superfluous to remove the door that creaks from its place, and then, of course, put it back.

Of course, any lubricant can develop its life over time. So, the door - it doesn’t matter whether it is the entrance or interior doors - will again begin to open with a creak. But there is nothing to worry about here: just repeat the proven procedure.

How to deal with the creak of metal doors?

Modern doors are made of different materials, and in this matter it matters.

For metal doors, of course, engine oil and other specified compounds will also be effective, but only if the metal creaks due to friction of the components of the loop.

However, the annoying sound may also be due to the fact that the canopies were not installed correctly when installing the door. In this case, especially if the design is input, the only option is to contact a professional installer. Independently, without special knowledge and skills, it is unlikely to be able to fix everything.

A wooden door creaks? This is fixable too!

Wooden doors, such as the door of an old cabinet, may well creak. A tree has one significant feature: it swells from time to time or from frequent contact. And this, when opening the cabinet, leads to friction of the end against the door frame. As a result, a characteristic creak appears. You can get rid of it with a tool such as a planer.

It is also worth adding that the most common problems with creaking are wooden economy door constructions.

Get rid of the creak of a plastic door

The doors in the rooms today may well be made of plastic. Especially often this material is used to make doors that lead from the room to the balcony. This is due to the fact that now, in principle, plastic trim on the balcony is fashionable.

And now the problem arises: is the plastic door creaking? What to do and how to be? In general, all the tools referred to in this article are relevant. However, there are opinions that some oils (spindle, engine, diesel) destroy plastic, and therefore it is better to choose, for example, silicone grease.

Note that any plastic door is actually quite heavy, so creaking can occur due to a phenomenon such as sagging. To eliminate this drawback, you need to adjust the upper loop. And for this you will have to remove decorative accessories. The same will need to be done if the bottom loop is problematic. Of course, it is better if a professional and specialist takes up these operations.

Tip

If, despite all the efforts and methods, the creak has not disappeared, it means that the accessories just served their time and it needs to be changed to a new one.

How to "cure" the creak of the refrigerator door?

And finally, it’s worth saying about the refrigerator door. Usually in such a door there are both metal and plastic elements. Squeaking can occur here, for example, only when the refrigerator door opens wide. On the other hand, it is not surprising if the creak appears immediately upon opening.

In this case, the first thing to do is to lubricate the plastic rings located on the lower axis of the door with some means. Then you need to move the door back and forth, up and down, so that the grease is evenly distributed.

There may be another reason for the creaking - this is the abrasion of the "native" plastic insert. It can be replaced with a fluoroplastic washer, this will really help to cope with unpleasant sounds when opening the refrigerator.

And one more thing: if the refrigerator has not yet expired the warranty period, then the creak is a good reason to call the official service center - they must respond and send the wizard.

So, if the front, interior or balcony door began to make annoying sounds, this can easily be fixed. It is also easy to tidy up the cabinet door or refrigerator, the main thing is to correctly determine the cause of the annoying squeak.