5 best mold and mildew remedies on walls

Do not believe people who say that it is impossible to completely get rid of the fungus and mold on the walls, that any remedy only temporarily solves the problem, but soon it all starts again. Of course, if you buy the first fungicide that comes to hand, treat it with an unprepared surface and find the issue resolved, this is exactly what will happen - soon spots will again appear on the wallpaper. To destroy the mold completely, you will have to make a lot of effort and time. In the future, it will be necessary to observe preventive measures and periodically inspect building structures: the fungus is very insidious, it can hide in any microscopic crack and again begin destructive work.

How to understand that a fungus has wound up in the house?

An insidious enemy can take a different guise. The words "fungus" and "mold" are called colonies of microorganisms. They have microscopic dimensions, you cannot see them with the naked eye. Visible spots consist of a huge number of tiny fungi. Depending on their type, plaque has a different color:

• the white bowl most spreads from too moist soil in flower pots;
• green usually goes to building materials with food;
• blue likes to settle on wooden structures;
• black lives on any surface.

It should also alert peeling of finishing materials from the walls, the destruction of plaster. First, the paint swells and peels, then cement or brick, destroyed to a state of dust, begins to pour in from under it. Such a picture can be observed both inside the building and on the facade. If you leave the problem unattended, load-bearing structures will begin to collapse, the house will become in disrepair and may collapse.

Not always the fungus settles on open surfaces - he loves moisture and still air. Often such conditions arise in hard-to-reach places: behind furniture, under carpets, inside cabinets, behind a bathroom and sink. In this case, a smell can warn you about the danger. If you feel that it smells like from a damp basement from some angle, move all the obstructing objects away from the walls and look for suspicious spots.

People who are prone to allergies are the first to know about the appearance of mold. If before they were quietly in the apartment, and recently they began to complain of a runny nose, tears, itching, perhaps they felt the spread of the fungus. Pets can be sick and die in an infected room. If you notice a deterioration in well-being in any inhabitant of the home, look for the presence of the fungus and take preventive measures against its appearance. At first, toxins released by mold affect weak organisms, but when a colony grows, a person with good health can get sick. Do not expect more disturbing manifestations, take measures at the first symptoms of infection.

Getting rid of mold by folk methods

Until the fungus penetrates deep into the building structure, you can try to cope with it without the help of chemistry. Previously, creosote or bleach was used for such purposes, now this is not necessary. The compounds are toxic, after them for several days it is impossible to get rid of the disgusting smell. Modern drugs are convenient for use, they are more effective, and there is less harm from them.

If you want to act by folk methods, you can use the following tools.

• Vinegar - suitable for all surfaces.
• Soda solution (1 h.spoon on a glass of water) - for materials that are not afraid of contact with alkali.
• Liquid ammonia - it is diluted with water in a ratio of 1: 1 and used on smooth coatings that do not absorb moisture.
• Tea tree oil (1 teaspoon per glass of water) - helps to remove the fungus, disinfects the room and neutralizes unpleasant odors.
• Hydrogen peroxide - discolors the color, it is better to use it in bright areas.

First clean the coating from dust, dirt and plaque that can be removed with a damp cloth. Then draw an aqueous solution of any of these substances into the spray bottle and spray the affected surface. Use a rag to remove mold deposits, but do not wipe dry. The remaining moisture will penetrate the pores and microcracks and destroy the microorganisms settled there. After an hour, do a thorough cleaning, ventilate the room well so that the air in the room becomes dry. With this method, folk remedies against mold will help get rid of a recently appeared fungus.

Repeat treatment weekly for at least 1.5 months. Do not forget that it is undesirable to breathe in pairs of even household preparations, wear gloves, protect your eyes with glasses, and the airways with a cotton-gauze bandage. The fungus can settle in any apartment, so for preventive purposes, at each cleaning, add any of these substances to the water. The fact is that mold spores are very small, they fly in the ambient air and are present on any surface. The only thing that saves us is the need for humidity and other conditions vital for mold.

Top 5 remedies for mold and mildew on the walls

If the raid has spread over a large area, then the mold has already managed to penetrate deep into the building structures. Folk remedies will no longer help, to fight the enemy you need to acquire a stronger composition. In the household chemistry departments, you will see a whole shelf made up of various anti-fungal drugs, and your task is to find the most effective and safe weapon.

So that the work is not wasted, from the fungus on the walls, choose products that have earned good marks from experts and consumers.

1. Olympus Stop Mold safe for people and pets. Suitable for processing any materials and finish coatings.
2. Dali It will relieve mold and moss. The drug can not be washed off.
3. Atlas Mykos removes mold, fungal infections, lichens, moss. It can be used in rooms with a high level of humidity. Available in the form of a concentrate, which must be diluted with water.
4. Fungicide Spectrum can be used both indoors and on facades. Suitable for plaster, wood structures and painted surfaces.
5. "Titanium Fungicide" can be used both inside and outside the building. When processing the drug, it is not necessary to remove the paint layer.

Before using any of these tools, carefully read the instructions. Do not neglect the recommended measures to protect the respiratory tract, skin and eyes, your task is to destroy the mold, and not undermine your own health. If you use a concentrate, dilute it in the right proportion: too strong a solution is not only harmful to health, but can also damage building structures. Remember that you need to process both the affected area and the area adjacent to it (the fungus spreads very quickly, and small colonies may still be invisible in neighboring areas).

In the annotation to some fungicides it is written that they can be applied without removing the finishing coating. In the initial stage of the appearance of the fungus, you can try, but if the matter has gone too far, light measures will not help, even if the best remedy is used. Remove paint and wallpaper from walls, tap plaster. If you hear a dull sound, it means that there are voids inside in which spores are already growing.Beat off all exfoliating areas, clean the surface with a metal brush, apply an antifungal drug and leave to dry for at least 5 hours. Then cover the damaged areas with a deep penetration primer, plaster and apply the finishing coat. Inspect furniture and all items at the same time. If there are traces of mold, treat them with fungicides, and items that are not of special value, just burn.

Tip

For repairs, it is better to use glue with antifungal properties. It creates a protective film that does not allow moisture to enter.

If very large sections of the wall are affected, the plaster crumbles under the fingers, only major repairs of the apartment will help. Knock off all the finishing layers from the walls, brick or concrete well cleaned with brushes and burn with a blowtorch. Thoroughly treat all surfaces with fungicides and only after 2 days proceed with finishing.

Important!

Before work, be sure to find and eliminate the causes of moisture. If this is not done, the mold will appear again. To create a finishing coat, use silicate or dispersion fungicidal paints that are not covered by the fungus.

Prevention

To prevent the appearance of fungus, you need to think well what you want when buying an apartment: save, and then spend a lot of money and nerves to deal with various problems, or pay a decent amount and get good housing. First of all, inspect the entire building. If it is dilapidated, the seams between the panels are poorly sealed, the brick crumbles with one touch - be sure that the fungus lives there and feels great. You can’t even enter the apartment. Most likely, the owners gave it a presentation, a week ago they made repairs and pasted new wallpapers, but after a while the mold will come out. It is better to buy an apartment in a new building and immediately carry out preventive measures.

Mold spores are very light, they fly in the air and on the street, and in any room, but for the colony to take root on the wall, it needs certain conditions. High humidity, the lack of sunlight and fresh air will come to the fungus's taste. To prevent this, insulate the freezing corners, close the cracks in the openings. Keep an eye on the condition of the sanitary equipment: the hoods should work well and the taps should close tightly. Pay attention to pipes and other metal surfaces in the bathroom. If condensation is noticed there, the humidity in the room is increased, and even if there is no mold yet, it will certainly appear soon.

Tip

In a damp apartment, it is better not to install sealed plastic windows. If it is impossible to do without them, make good ventilation, install an air conditioner and regularly take preventive measures against the appearance of mold.

If there are leaks in the roof or joints, require the management company to clean the building. No trees or structures should block your windows from sunlight - if this happens, contact the Department of Architecture and Landscape Design. Do not forget to periodically ventilate the apartment, do not dry laundry in the room, spill water on the floor or on the table wipe dry. On sunny days, you should not keep the curtains tightly closed. To prevent the room from being too hot and bright highlights not irritating your eyes, use tulle or blinds. Periodically during wet cleaning, wipe the walls with folk or purchased anti-mold preparations.

Stains of the fungus do not just spoil the appearance of the finish coatings - they penetrate deep into building structures and destroy them. Microorganisms secrete toxins that are harmful to the respiratory tract, joints and other body systems. When buying an apartment, be very careful, and if you already got infected housing, do not spare your efforts to fight with a microscopic enemy. You can cope with mold if you do not spare forces and means.