How to install the washing machine so that it does not jump during the spin cycle?

It often happens that high-quality equipment is bought, it seems to be installed correctly, and then it turns out that the washing machine jumps during spinning. You can, of course, leave it that way, but constant noise is inconvenient, and it will also reduce the service life.

The fact that your washing machine vibrates violently may be due to technical problems or installation in the wrong place.

Why does the washing machine jump during the spin cycle and what can be done about it?

First of all, check if everything is done according to the instructions during installation. Often the machine jumps simply because the transport anchors were not removed before use. They can be called transportation bolts, but this is not entirely correct - in addition to the bolts, there are other details, but this is not essential. They are installed in the machine for rigid fixation of the tank, which, as the name implies, protects the machine from damage during transportation. Sometimes during installation they are forgotten to remove or simply do not understand why they need to be removed, and this leads to strong vibration during the spin cycle. When the anchors are removed, the tank hangs freely on the shock absorbers, which soften the vibration. If you have no idea how to do this, it is better to call the wizard. Readers who are confident enough in their abilities can simply follow the instructions - it describes in detail and with illustrations how to remove the anchor when installing the washing machine.

Another reason for the jumping machine may be that the legs are not adjusted. This can be dangerous: if it is not quite level, some parts may touch each other and deteriorate. Check the machine for unsteadiness, shaking from side to side - the fact that it yields, clearly indicates that the legs are not adjusted correctly. This is not at all difficult to fix on your own. Most often, the legs of the machine are simply twisted like bolts, so anyone can do it right. The best option for adjustment is to put a building level on the machine (if it is not there, you can use a saucer with water, but it will not give such accuracy). First you need to put the building level parallel to the front (the door is located on it) and the rear wall of the machine, check the inclination in this plane and adjust it. After that - put it parallel to the side walls, that is, perpendicular to the previous position, and do the same.

If the previous tips did not work, perhaps the reason is not in the machine, but in the wrong floor for it (too smooth, crooked or not strong enough). To fix this, you can buy a thick rubber mat, special rubber pads or suction cups. The pads will need to be glued: check with the sellers how to do this with those that you purchased. All this you will surely be able to find in any home goods store. In addition, the machine could move banally. Check if it is in contact with walls, pipes, or other objects around it.

Still not sure why the washing machine jumps? Some cars begin to shake and make noise when they can’t cope with the proper balancing of linen. It is worth looking at the instructions on how much laundry is recommended to load. It is also advised to add a couple of towels if you wash one massive thing (for example, a jacket) so that the laundry is evenly distributed. When loading, try to distribute things evenly across the drum and not wash too little or too much.

Shock absorber in the washing machine

If the machine used to work properly

For some time the machine worked fine, and now it jumps? This may indicate a malfunction, and it is better to deal with breakdowns as early as possible, before they lead to more serious damage. Most often these are problems with a counterweight, shock absorbers or bearings.

• Shock absorbers.

Shock absorbers in washing machines are designed to cushion vibrations and prevent the tank from hitting the body, which keeps all parts intact.

To check the shock absorber, pull the tank towards you and release it. To do this, put your hand inside the drum, as if to catch on it and pull. If he just returns to his place - everything is in order. If it sways from side to side, the shock absorbers will have to be changed.

To fix shock absorbers, you need to change the plastic plates. Disconnect the shock absorber from the body (for this you need to unscrew a few screws and remove it). If damaged covers are found, remove them and replace with new ones. To do this, you need to unclench the U-shaped metal rods, install new parts and return the rods to their previous position.

• Counterweights.

A counterweight is a heavy unit that also interferes with vibration, which makes the washing machine stable. It is made of concrete or plastic. Concrete balances crumble and collapse over time. But more often there are problems with fastening - they become loose, there is a characteristic knock and vibration. If you do not know how to replace them correctly, calling a wizard is a good solution.

• Bearings.

Unfortunately, due to moisture, some breakdowns in washing machines are almost inevitable. Bearings, for example, most likely after some time will begin to rust and collapse, as a result of which they will become unusable. At first, the machine makes an iron rattle, and when the damage becomes more serious, the drum starts to move freely from side to side, and the machine vibrates a lot. If you suspect a bearing breakdown, it is highly recommended not to use the machine - during operation, they can literally fly apart, which will damage other parts. It is better not to change the bearing yourself - such work requires experience and special knowledge.

Tip

If you are not confident in your abilities and knowledge, we strongly recommend that you seek the help of a specialist.

There are many cases where, not knowing what, how and why to do, unlucky masters simply broke the technique. Some parts of washing machines are quite expensive, and the new machine - even more so. So it may happen that in pursuit of savings, you will eventually have to spend on more complicated repairs and the purchase of new parts.